HunterDouglas Vignette Modern Roman Shades Installation Operation Care page 13

Satellite Battery Pack (If Applicable)
NOTE: Refer to this section if your shade includes a battery wand.
Mount the Satellite Battery Pack
Decide where you want to attach the wall mount bracket.
■
A satellite battery pack may be mounted in any orientation.
Mark the screw holes.
■
Predrill the screw holes using a
■
Remove the backing from the double-sided tape on the wall
■
mount bracket. Press the bracket into place.
Attach the bracket using the screws provided.
■
Position the battery wand so the power cable is easily connected to the socket.
■
Snap the battery wand into the bracket.
■
Socket
Install the cover with the slot aligned to the socket in the battery wand.
■
Slot
Socket
Plug the power cable from the shade into the extension cable.
■
Plug the other end of the extension cable into the socket in the battery wand.
■
⁄ " drill bit.
3
32
Battery Wand Cover
Power Cable
from Shade
Proceed to "Operate the Shade" on page 18.
Battery Wand Cover
Extension
Cable
INSTALLATION
Wall Mount Bracket
11