HunterDouglas Vignette Modern Roman Shades Installation Operation Care page 14

Rolling style duolite shades, powerview gen 3 automation

Hide thumbs Also See for Vignette Modern Roman Shades:

Table of Contents

INSTALLATION

Headrail-Mounted Rechargeable Battery Wand (If Applicable)

NOTE: Refer to this section if your shade includes a battery wand.

Insert the Battery Wand into the Rechargeable Battery Mount

NOTE: The rechargeable battery wand ships fully charged, so it is ready to install out of the

package.

Match the direction of the arrow on the underside of the battery wand with the arrow on

■

the battery mount.

Insert the nose of the battery wand into the cavity of the battery.

■

Push the battery wand flush into the mount until the battery snaps into place.

■

CAUTION: Be sure the cable does not become pinched by the installation bracket or

battery wand clip. Damage or overheating of components could result.

CAUTION: Failing to insert wand properly may cause it to fall out of the mount, posing an

injury risk and potentially damaging the wand. Additionally, when mounting on a door, closing

the door with excess force may cause battery wand to dislodge from the mount, also posing

an injury risk and possibly damaging the wand.

Socket

Proceed to "Operate the Shade" on page 18.

Back of Shade

Table of Contents