HunterDouglas Vignette Modern Roman Shades Installation Operation Care page 11

Mount the Headrail
CAUTION: Be sure the cables do not become
pinched by the installation brackets when
mounting the headrail.
Peel back the protective covering from the
■
top of the fabric-covered headrail. Leave
the rest of the protective covering on the
front of the headrail.
Hold the headrail so the front (curved side)
■
faces you.
Push the top edge of the headrail into the
■
installation brackets.
Rotate the headrail and push back toward
■
the window until you hear an audible click.
The click indicates that the back edge of
the headrail is securely seated into the
bracket channel.
WARNING: Failure to snap the
headrail securely into the
installation brackets may cause the
shade to release unexpectedly.
Gently pull on the front of
■
the headrail at each bracket
to ensure that the headrail is
locked into the brackets.
Completely remove the
■
protective covering from the
fabric-covered headrail by
peeling the covering all the way
to one end of the headrail.
INSTALLATION
Installation
Bracket
Fabric Guard
2
3 Back of
Bracket
1
Front of
Bracket
Headrail
Back of
Bracket
9