HunterDouglas Vignette Modern Roman Shades Installation Operation Care page 25

Rolling style duolite shades, powerview gen 3 automation
Hide thumbs Also See for Vignette Modern Roman Shades:
Table of Contents

Advertisement

Problem
Rechargeable battery needs recharging
There are two methods for charging the rechargeable battery wand — the
Solution
dual charging station or the single charger.
CAUTION: The rechargeable battery wand can only be charged with these
Hunter Douglas provided charging options. Attempting to charge battery
wands with an alternative charger may result in permanent damage.
Removing the Rechargeable Battery Wand from the Mount
To safely remove the rechargeable battery wand from your shade, grasp
the end of the battery wand that is furthest away from the power socket.
CAUTION: Grasp the wand firmly prior to removal.
Using the indentation on the end of the battery wand, use your index
finger to pull the battery out of the mount.
NOTE: The mount should remain installed and plugged into the shade
cable during this process. You will simply remove the wand from the
mount.
Recharging Via the Dual Charging Station
Plug the dual charging station into a standard AC outlet.
Insert the nose of the rechargeable battery wand into
one of the slots of the dual charging station.
The battery will firmly snap into place. A red light
indicator on the front of the charging station will turn on
when the battery wand has been properly inserted and
being charged.
Once the battery has been fully recharged, the red light
indicator will turn green. Charging may take up to three
hours, depending on your battery level.
Remove the battery wand from the charger.
(Continued on next page.)
TROUBLESHOOTING
23

Advertisement

Table of Contents
loading

Table of Contents