HunterDouglas Vignette Modern Roman Shades Installation Operation Care page 8

INSTALLATION
Attach the installation brackets using the screws provided.
■
IMPORTANT: If using a battery wand or headrail-
mounted rechargeable battery wand, use a minimum
of one ⁄ " and one
1
2
bracket to provide the clearance required for the
battery wand. See the instructions below.
If the shade will be powered by a battery wand/rechargeable battery wand:
■
Attach the installation brackets with both the
head screws (not provided).
The solid side of the spacer blocks faces the
➤
mounting surface.
If using additional spacer blocks for more
➤
clearance, attach the installation brackets and
spacer blocks with #6 screws long enough for a
secure installation.
IMPORTANT: Do not add more than 1
clearance using spacer blocks.
IMPORTANT: The tops of the installation brackets
must be level with the front edges aligned.
Proceed to "STEP 2 — Remove the Shipping Clips" on page 7.
6
3"
⁄ " spacer blocks per installation
1
4
Spacer
Blocks
⁄ "
1
2
"
⁄
1
4
⁄ " and ⁄ " spacer blocks. Use 2" #6 hex
1 1
4 2
Spacer
Blocks
⁄ " of
1
2
Longer
Screws