HunterDouglas Vignette Modern Roman Shades Installation Operation Care page 18

INSTALLATION
18V DC Power Supply with Daisy-Chain Connections
NOTE: The daisy-chain feature is only available with the 18V DC Power Supply option. Refer
to this section if you have an 18V Power Supply with daisy-chain connections.
The daisy-chain feature allows up to three PowerView
powered by a single 18V DC Power Supply. However, each shade can operate independently.
Route the power cables from each shade to the connector, using extension cables if
■
necessary.
Plug an extension cable into the connector and the 18V DC Power Supply. A two-shade
■
configuration is shown below.
Plug the 18V DC Power Supply into a standard outlet.
■
An additional Y Adapter and two additional extension cables are used for three shades.
■
16
Power
Cable
from
Shade
Extension
Cable
Proceed to "Operate the Shade" on page 18.
Gen 3 automated shades to be
®
Extension
Y Connector
18V DC Power
Supply
Cable