Appendix B: Specifications - GE Giraffe OmniBed Carestation CS1 Service Manual

Appendix B: Specifications

Power Requirements
11.5 A @ 100V ~, 50/60 Hz
9.5 A @ 115V ~, 50/60 Hz
5.5 A @ 220V ~, 50/60 Hz
5.5 A @ 230V ~, 50/60 Hz
5.5 A @ 240V ~, 50/60 Hz
Inrush for 1/2 cycle current < 80 A
Electrical
Operation
Device Type
Applied Part
Operating Environment
Temperature
Humidity
Altitude
Air Velocity
Water Ingress
Use Environment
Storage Conditions
Temperature
Humidity
Pressure
User Control Settings
Patient Control Temperature
Radiant Heat Power
Air Control Temperature
Humidity
Cleaning
Cold Chemical Disinfectant
Sterilization Not Required
Defibrillation Proof
Applied Parts Area Not Defibrillation Proof
Signal Input/Output
RS-232 Serial Data
2 A @ 100V ~, 50/60 Hz (Accessory Outlet)
2 A @ 115V ~, 50/60 Hz (Accessory Outlet)
1 A @ 220V ~, 50/60 Hz (Accessory Outlet)
1 A @ 230V ~, 50/60 Hz (Accessory Outlet)
1 A @ 240V ~, 50/60 Hz (Accessory Outlet)
Continuous
Class 1
Type B
20 - 30°C
5 - 85% Non-condensing relative humidity
Up to 10,000 ft (3,048m, 696 hPa)
Up to 0.3 m/s
IPX0
Equipment not suitable for use in the presence of a flammable anesthetic
mixture.
-25 to 60°C
≤ 85% Non-condensing relative humidity (above 0°C)
50 - 106 kPa
35 - 37.5°C in 0.1°C increments
0 - 100% in 5% increments
20 - 39°C in 0.1°C increments
30 - 95% RH in 5% increments
B-1