Figure 7-10. North Seal Parts; Figure 7-11. Beveled Side Of North Spacer Toward Canopy - GE Giraffe OmniBed Carestation CS1 Service Manual

Chapter 7: Repair Procedures
Canopy Removal for Service
h. Install and remove seals to check for easy installation.
* You may wish to retain the hardware by sliding the seal over the rail. Then you can place the spacer washers on that
rail assembly before placing the rail assembly on the canopy.
INSIDE OF CANOPY
Beveled edge
10. Install north seal parts on the upside-down canopy:
a. Orient the north spacer with the beveled side toward the canopy edge, as shown in
and
Canopy
Smooth nut
INSIDE OF CANOPY
7-8

FIGURE 7-10. North Seal Parts

Figure 7-11.

FIGURE 7-11. Beveled Side of North Spacer Toward Canopy

Beveled edge
Spacer washer
Smooth nut
Canopy
North seal
Spacer washer
North spacer
M4x30 sockethead
set screw cup point
Hex socket end
OUTSIDE OF CANOPY
Figure 7-10
North spacer
Set screw
Hex socket end
OUTSIDE OF CANOPY
Service Manual