Section 2: Getting Started; Overview; Unpacking And Inspecting; Environmental Operating And Standby Conditions - GE AED Pro Operator's Manual

SECTION 2: GETTING STARTED

OVERVIEW

This section presents information on unpacking and setting up the AED Pro
TOPIC

UNPACKING AND INSPECTING

ENVIRONMENTAL OPERATING AND
STANDBY CONDITIONS
AED PRO PARTS
®
INTELLISENSE BATTERY
RECHARGEABLE BATTERY
DEFIBRILLATION ELECTRODES (PADS)
AED INDICATORS
SETTING THE AED PRO INTERNAL CLOCK
VOICE PROMPTS AND TEXT DISPLAY
UNPACKING AND INSPECTING
Every attempt is made to ensure your order is accurate and complete. However, to be sure that your order is correct,
verify the contents of the box against your packing slip.

ENVIRONMENTAL OPERATING AND STANDBY CONDITIONS

See Section 6 – Technical Data, Parameters, Environmental Operation and Standby Conditions.
CAUTION: Temperature/Humidity/Pressure Extremes
Exposing the AED Pro to extreme environmental conditions outside of its operating parameters may compromise
the ability of the AED Pro to function properly. The RescueReady
environmental conditions on the AED Pro; if the daily self test determines environmental conditions outside of the
AED Pro's operating parameters, a "SERVICE REQUIRED" alert will be issued to prompt the user to move the AED
Pro to environmental conditions within the acceptable operating parameters at once. See Section 6 – Technical
Data, Parameters, Operation and Standby Conditions.
2023486-201 Rev C
PAGE #
11
11
12
13
15
16
17
19
20
®
© 2007 General Electric Company
Section 2: Getting Started
daily self test verifies the impact of extreme
Page 11 of 53