3-2.2 Rate Limiters - ZyXEL Communications XGS3600 Series Manual

3-2.2 Rate Limiters

The section describes how to configure the switch's ACL Rate Limiter parameters. The Rate
Limiter Level from 1 to 12 that allow user to set rate limiter value and units with pps.
Web Interface
To configure ACL Rate Limiter in the web interface:
1. Click Configuration, ACL, then Rate Limiter
2. To specific the Rate field and the range from 0 to 131071.
3. To scroll the Unit with pps or kbps
4 . Click the Apply to save the setting
5. If you want to cancel the setting then you need to click the reset button.
It will revert to previously saved values.
Figure 3-2.2: The ACL Rate Limiter Configuration
Parameter description:
Rate Limiter ID :

The rate limiter ID for the settings contained in the same row.
Rate

The allowed values are: 0-131071 in pps or 0, 100, 200, 300, ..., 1000000 in
kbps.
Buttons

Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
XGS3600 Series User's Guide
54