The Port Rate Edit Screen; Storm Control - ZyXEL Communications GS1900 Series User Manual

Table 69 Configuration > Port > Bandwidth Management > Egress Global Burst (continued)
L ABEL
Edit
Cancel
19.5.2 T he Po rt Ra te Edit Sc re e n
Use this screen to configure port rate Bandwidth Management settings. Click
Ba ndwidth Ma na g e m e nt
Fig ure 122
The following table describes the labels in this screen.
Table 70 Configuration > Port > Bandwidth Management > Egress Global Burst > Edit
L ABEL
Port Rate
Port List
Ingress State
Ingress
Bandwidth
(Kbps)
Egress State
Egress
Bandwidth
(Kbps)
Apply
Cancel
19.6 Sto rm C o ntro l
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure (DLF)
packets the Switch receives per second on the ports. When the maximum number of allowable
broadcast, multicast and/or DLF packets is reached per second, the subsequent packets are
discarded. Enable this feature to reduce broadcast, multicast and/or DLF packets in your network. You
can specify limits for each packet type on each port.
Chapter 19 Configuration: Port
DESC RIPT IO N
Select this check box to configure the properties of a port. Click the
properties of the port.
Click to discard the changes.
C a nc e l
>
Eg re ss G lo b a l Burst
Configuration > Port > Bandwidth Management > Egress Global Burst > Edit
DESC RIPT IO N
Displays the list of port index numbers that are being configured.
Select to activate ingress peak rate limits on the ports.
Ena b le
Enter the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing traffic flow
on a port.
Select to activate egress peak rate limits on the ports.
Ena b le
Enter the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing traffic flow
on a port.
Click to save the changes.
Apply
Click to discard the changes.
C a nc e l
GS1900 Series User's Guide
> to open this screen.
Edit
125
button change the
Edit
> >
C o nfig ura tio n Po rt