ZyXEL Communications XGS3600 Series Manual page 209

DSCP :

Maximum number of supported DSCP values is 64 and valid DSCP value ranges from 0 to
63.
Ingress :

Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS
class and DPL map.
There are two configuration parameters for DSCP Translation –
1. Translate : DSCP at Ingress side can be translated to any of (0-63) DSCP values.
2. Classify : Click to enable Classification at Ingress side.
Egress :

There are following configurable parameters for Egress side –
1. Remap DP0 : Select the DSCP value from select menu to which you want to remap.
DSCP value ranges from 0 to 63
2. Remap DP1 : Select the DSCP value from select menu to which you want to remap.
DSCP value ranges from 0 to 63.
There is following configurable parameter for Egress side -
•
Remap: Select the DSCP value from select menu to which you want to remap. DSCP
value ranges from 0 to 63.
Buttons:

Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
XGS3600 Series User's Guide
202