ZyXEL Communications XGS3600 Series Manual page 231

Gbe l2 switch with 10g gbe uplink
Table of Contents

Advertisement

Inner VLAN ID Range :
When "Range" is selected for the VLAN ID filter, you can enter a specific range. The
allowed range is from 0 through 4094.
Inner Tag PCP :
The inner PCP value for mataching the ECE. It only significant if inner tag type 'Tagged' is
selected. The possible values are:
Any: The ECE will match any PCP value.
Range: The ECE will match PCP values in the selected range 0-1, 2-3, 4-5, 6-7, 0-3 or 4-7.
Specific: The ECE will match a specific PCP in the range 0 through 7.
Inner Tag DEI :
The inner DEI value for mataching the ECE. It only significant if inner tag type 'Tagged' is
selected. The allowed value is: 0, 1 or Any.
Frame Type :
The frame type for the ECE. The possible values are:
Any: The ECE will match any frame type.
IPv4: The ECE will match IPv4 frames only.
IPv6: The ECE will match IPv6 frames only.
DSCP Filter :
The DSCP filter for matching the ECE. The possible values are:
Any: No DSCP filter is specified. (DSCP filter status is "don't-care".)
Specific: If you want to filter a specific DSCP value with this ECE, choose this value. A
field for entering a specific value appears.
Range: If you want to filter a specific DSCP range filter with this ECE, choose this value. A
field for entering a range appears.
DSCP Value :
When "Specific" is selected for the DSCP filter, you can enter a specific value. The allowed
value is from 0 through 63.
DSCP Range :
When "Range" is selected for the DSCP filter, you can enter a specific range. The allowed
range is from 0 through 63.
Actions
Direction :
The EVCs and ECEs are used to setup flows in one or both directions as determined by
the ECE Direction parameter. If the ECE is bidirectional, the ingress rules of the NNI ports
will be setup to match the traffic being forwarded to NNI ports. The possible values are:
Both: Bidirectional.
UNI-to-NNI: Unidirectional from UNI to NNI.
NNI-to-UNI: Unidirectional from NNI to UNI.
EVC ID Filter :
The EVC ID for the ECE. The ECE is only active when mapping to an existing EVC. The
possible values are:
Any: No EVC ID filter is specified. (EVC ID filter status is "don't-care".)
Specific: If you want to filter a specific EVC ID with this ECE, choose this value. A field for
entering a specific value appears.
EVC ID Value :
XGS3600 Series User's Guide
224

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xgs3600-26fXgs3600-28Xgs3600-28f

Table of Contents