Untrusted: Configure the port as untrusted source of the DHCP messages.
Buttons:
Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
4-3.2 Statistics
The section describes to show the DHCP Snooping Statistics information of the switch. The
statistics show only packet counters when DHCP snooping mode is enabled and relay mode
is disabled. And it doesn't count the DHCP packets for DHCP client.
Web Interface
To configure a DHCP Snooping Statistics Configuration in the web interface:
1. Specify the Port which you want to monitor.
2. Check "Auto-refresh".
Figure 4-3.2: The DHCP Snooping Port Statistics
Parameter description:
Rx and Tx Discover :
The number of discover (option 53 with value 1) packets received and transmitted.
Rx and Tx Offer :
The number of offer (option 53 with value 2) packets received and transmitted.
Rx and Tx Request :
The number of request (option 53 with value 3) packets received and transmitted.
Rx and Tx Decline :
The number of decline (option 53 with value 4) packets received and transmitted.
Rx and Tx ACK :
The number of ACK (option 53 with value 5) packets received and transmitted.
Rx and Tx NAK :
The number of NAK (option 53 with value 6) packets received and transmitted.
Rx and Tx Release :
The number of release (option 53 with value 7) packets received and transmitted.
Rx and Tx Inform :
XGS3600 Series User's Guide
265