Table of Contents
Advertisement
State
Counter
5.3.31 ACL Rate Limiters
Configure the rate limiter for the
80
Disabled: Port shut down is disabled.
The default value is "Disabled".
Note: The shutdown feature only works when the packet length is less than
1518(without VLAN tags).
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL user
module.
Disabled: To close ports by changing the volatile port configuration of the ACL user
module.
The default value is "Enabled".
Counts the number of frames that match this ACE.
Buttons
Click to apply changes.
Click to undo any changes made locally and revert to previously saved values.
Click to refresh the page; any changes made locally will be undone.
Click to clear the counters.
ACL
of the switch.
Advertisement
Table of Contents
