ZyXEL Communications XGS3600 Series Manual page 168

Indicates the VLAN ID.
Port Members :

A row of check boxes for each port is displayed for each MAC-based VLAN entry. To
include a port in a MAC-based VLAN, check the box. To remove or exclude the port from
the MAC-based VLAN, make sure the box is unchecked. By default, no ports are members,
and all boxes are unchecked.
Adding a New MAC-based VLAN

Click "Add new entry" to add a new MAC-based VLAN entry. An empty row is added to the
table, and the MAC-based VLAN entry can be configured as needed. Any unicast MAC
address can be configured for the MAC-based VLAN entry. No broadcast or multicast MAC
addresses are allowed. Legal values for a VLAN ID are 1 through 4095.
The MAC-based VLAN entry is enabled on the selected stack switch unit when you click on
"Apply". A MAC-based VLAN without any port members on any stack unit will be deleted
when you click "Apply".
The "Delete" button can be used to undo the addition of new MAC-based VLANs.
Buttons:

Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
XGS3600 Series User's Guide
161