3-7.3 Groups Information - ZyXEL Communications XGS3600 Series Manual

3-7.3 Groups Information

The section describes user could display the MVR Groups detail information on the switch.
Entries in the MVR Group Table are shown on this page. The MVR Group Table is sorted first
by VLAN ID, and then by group
Web Interface
To display the MVR Groups Information in the web interface:
1. Click Configuration, MVR, Groups Information
2. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh".
3. To Click the " Refresh" to refresh a entry of the MVR Groups
Information.
4. Click "<< or >> " to move to previous or next entry.
Figure 3-7.2: The MVR Groups Information
Parameter description:
MVR Group Table Columns
VLAN ID :

VLAN ID of the group.
Groups :

Group ID of the group displayed.
Port Members :

Ports under this group.
Auto-refresh :

To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh, <<, >> ):

You can click them for refresh the MVR Group information by manual, others
for next/up page or entry.
XGS3600 Series User's Guide
126