ZyXEL Communications XGS3600 Series Manual page 295

it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but only if
more than one server has been configured.
RADIUS Authentication Server Configuration
The table has one row for each RADIUS Authentication Server and a number of columns,
which are:
# :

The RADIUS Authentication Server number for which the configuration below applies.
Enabled :

Enable the RADIUS Authentication Server by checking this box.
IP Address/Hostname :

The IP address or hostname of the RADIUS Authentication Server. IP address is
expressed in dotted decimal notation.
Port :

The UDP port to use on the RADIUS Authentication Server. If the port is set to 0 (zero), the
default port (1812) is used on the RADIUS Authentication Server.
Secret :

The secret - up to 29 characters long - shared between the RADIUS Authentication Server
and the switch stack.
RADIUS Accounting Server Configuration
The table has one row for each RADIUS Accounting Server and a number of columns, which
are:
# :

The RADIUS Accounting Server number for which the configuration below applies.
Enabled :

Enable the RADIUS Accounting Server by checking this box.
IP Address/Hostname :

The IP address or hostname of the RADIUS Accounting Server. IP address is expressed in
dotted decimal notation.
Port :

The UDP port to use on the RADIUS Accounting Server. If the port is set to 0 (zero), the
default port (1813) is used on the RADIUS Accounting Server.
Secret :

The secret - up to 29 characters long - shared between the RADIUS Accounting Server
and the switch stack.
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns,
which are:
# :

The TACACS+ Authentication Server number for which the configuration below applies.
Enabled :

Enable the TACACS+ Authentication Server by checking this box.
IP Address/Hostname :

XGS3600 Series User's Guide
288