3-8.2 Lldp Neighbours - ZyXEL Communications XGS3600 Series Manual

3-8.2 LLDP Neighbours

This page provides a status overview for all LLDP neighbours. The displayed table contains a
row for each port on which an LLDP neighbour is detected. The columns hold the following
information:
Web Interface
To show LLDP neighbours:
1. Click LLDP Neighbours
2. Click Refresh for manual update web screen
3. Click Auto-refresh for auto-update web screen
Figure 3-8.2: The LLDP Neighbours information
Parameter description:
Local Port :

The port on which the LLDP frame was received.
Chassis ID :

The Chassis ID is the identification of the neighbour's LLDP frames.
Remote Port ID :

The Remote Port ID is the identification of the neighbour port.
System Name :

System Name is the name advertised by the neighbour unit.
Port Description :

Port Description is the port description advertised by the neighbour unit.
System Capabilities :

System Capabilities describes the neighbour unit's capabilities. The possible capabilities
are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
If none of the devices in your network support LLDP
N :
OTE
then the table will show "No LLDP neighbour information
found".
XGS3600 Series User's Guide
131