ZyXEL Communications XGS3600 Series Manual page 192

Rate :

Controls the rate for the queue policer. The default value is 500. This value is restricted to
100-1000000 when the "Unit" is "kbps", and it is restricted to 1-10000 when the "Unit" is
"Mbps".
This field is only shown if at least one of the queue policers are enabled.
Unit :

Controls the unit of measure for the queue policer rate as kbps or Mbps. The default value
is "kbps".
This field is only shown if at least one of the queue policers is enabled.
Buttons:

Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
XGS3600 Series User's Guide
185