2-6.4 Users - ZyXEL Communications XGS3600 Series Manual

2-6.4 Users

The function is used to configure SNMPv3 user. The Entry index key is UserName. To create
a new UserName account, please check <Add new user> button, and enter the user
information then check <Apply>. Max Group Number : 10.
Web Interface
To display how to add new user to the configure SNMP Users in the web interface:
1. Click SNMP, Users.
2. Click "Add new user"
3. Specify the Privilege parameter.
4. Click Apply.
Figure 2-6.4: The SNMP Users Configuration
Parameter description:
Delete

Check to delete the entry. It will be deleted during the next save.
User Name

A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 32, and the allowed content is ASCII characters from 33 to
126.
Security Level

Indicates the security model that this entry should belong to. Possible security
models are:
NoAuth, NoPriv: No authentication and no privacy.
Auth, NoPriv: Authentication and no privacy.
Auth, Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That
means it must first be ensured that the value is set correctly.
Authentication Protocol

Indicates the authentication protocol that this entry should belong to. Possible
authentication protocols are:
None: No authentication protocol.
MD5: An optional flag to indicate that this user uses MD5 authentication
protocol.
SHA: An optional flag to indicate that this user uses SHA authentication
protocol.
The value of security level cannot be modified if entry already exists. That
XGS3600 Series User's Guide
27