3-14.10 Dscp Classification - ZyXEL Communications XGS3600 Series Manual

3-14.10 DSCP Classification

The section describes to teach user to configure and allows you to map DSCP value to a QoS
Class and DPL value. Others the settings relate to the currently selected stack unit, as
reflected by the page header.
Web Interface
To configure the DSCP Classification parameters in the web interface:
1. Click Configuration, QoS, DSCP Translation
2. Scroll to set the DSCP Parameters
3. Click the Apply to save the setting
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Figure 3-14.10: The DSCP Classification Configuration
Parameter description:
QoS Class :

Available QoS Class value ranges from 0 to 7. QoS Class (0-7) can be mapped to followed
parameters.
DSCP :

Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding QoS Class
and DPL value
Buttons:

Apply – Click to apply changes.
Reset- Click to undo any changes made locally and revert to previously saved
values.
XGS3600 Series User's Guide
203