ZyXEL Communications XGS3600 Series Manual page 107

administrator.
Path Cost :

To display the port path cost. If path cost is show zero, the STP will get the
recommended value resulted from auto-negotiation of the link accordingly and
display this value in the field of Path Cost Status. Otherwise, it may show the
value that the administrator set up in Configured Path Cost and Path Cost
Status.
Priority :

To display the port priority. Priority here means Port Priority. Port Priority and
Port Number are mixed to form the Port ID. Port IDs are often compared in
order to determine which port of a bridge would become the Root Port. The
range is 0 – 240.
Admin Edge :

To display the port admin edge status. If you don't set any value then it will
show default value is Edge.
Admin P2P :

To display the port admin P2P status. If you don't set any value then it will
show default value is Auto.
Auto-refresh:

To evoke the auto-refresh to refresh the information automatically.
Upper right icon (Refresh)

You can click them for refresh the MRSTP port status information by manual.
XGS3600 Series User's Guide
100