How To Configure Bandwidth Control To Limit Incoming Or Outgoing Traffic Rate - ZyXEL Communications GS2210 series Handbook

3.4 How to configure bandwidth control to limit incoming or
outgoing traffic rate
This example shows administrators how to configure bandwidth control
to manage traffic rates. We can limit either incoming traffic, outgoing
traffic, or both. In this example, we use two computers: FTP Client (PC)
and FTP Server (FTPServer). PC will either be uploading files or
downloading files from the FTP Server.
Configure bandwidth control to limit the traffic rate
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using XGS4600-32 (Firmware Version: V4.50).
www.zyxel.com
115/215