③ Power/Trig Led; ④ Link Led; ⑤ Act Led; ⑥ Dc In/Trig Connector (6-Pin Round) - JAI GO-5000M-PGE-UV User Manual

GO-5000M-PGE-UV User Manual (Ver. 1.2)
③ POWER/TRIG LED
Indicates the power or trigger input status.
LED
Lit amber
Lit green
Blinking
green
④ LINK LED
Indicates whether the GigE network connection is established or not.
⑤ ACT LED
Indicates the GigE network status.
⑥ DC IN/TRIG Connector (6-Pin Round)
Connect the cable for a power supply (optional) or for DC IN / trigger IN here.
Note: Refer to the
Camera initializing
Camera in operation
During operation in trigger mode, trigger signals are being input.
Note: The blinking interval is not related to the actual input interval of the external
trigger.
Camera Side: HR10A-7R-6PB (73) (Hirose Electric or equivalent)
Cable Side: HR10A-7P-6S (Plug) (Hirose Electric or equivalent)
Pin No. Input/Output
1 Power In
2 In
3 In
4 Out
5 Out
6 GND
Digital IN/OUT Interface
Status
Signal
DC In
Opto In1
Opto Out 1
Opto Out 2
Opto Common
GND
topic as well.
- 14 -
Parts Identification
Description
DC +12V ~ +24V
GPIO 5
GPIO 1
GPIO 2