Connecting A Power Sensor; P-Series Sensor - Keysight N1911A Installation Manual

Connecting a Power Sensor

P-Series sensor

P-Series sensors are supplied with a permanently connected sensor cable.
1 Connect the P-Series sensor cable to the CHANNEL A (or CHANNEL B) input
2 Confirm a reading sensor pop-up message appears briefly.
3 Confirm the display has changed to a measurement reading.
Keysight N1911A and N1912A Installation Guide
connector.
Ensure you line up the red dots on the
sensor cable and power meter's connector
Getting Started
Dual channel
1
17