Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Inlet/Outlet Connections
The inlet and outlet ports are located on the back panel of the analyzer. (Figure 3) These
ports are shown in detail in Figure 8.
The unit ships with inlets and outlets capped for protection. The connections use
Swagelok fittings ISO thread size 1/4" and 3/8". (Figure 8)
Exhaust ports:
The exhaust is located on the external pump. It can either be connected to the
•
provided muffler to expel exhaust into the room air, or the exhaust can be routed to
the facility ventilation system.
Figure 8: Inlet/Outlets
18
Advertisement
Table of Contents
