USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Main Panel Displays
Click the Display button to change the display in the Main Panel . Clicking the Display
button multiple times lets you cycle through the three main panel displays. When the
analyzer is launched, it defaults to the Numeric Display . The three displays within the
display function are:
Numeric
•
Alarm Status
•
Spectrum
•
TimeChart
•
This section describes the displays.
Numeric Display
The Numeric Display is the default display. It appears when the analyzer is first turned on
or re-initialized.
Figure 23 shows the numeric readout of the last measurement of CH
(PPM), and isotope ratios in parts per thousand (‰).
Figure 23: Numeric Display
in parts per million
4
33