Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
The Plot Frequency radio buttons allow you to select between manually or automatically
plotting the data. (Figure 28)
To adjust the frequency:
1.
Click the Rate button (clock icon) on the User Interface Control Bar. (Figure 22)
The Data Rate Control Adjustment panel appears. (Figure 28)
2. Click the Plot on Demand radio button to manually plot the data.
a. When selected, the Refresh Plot button appears on the Main Panel display.
When Refresh Plot button is selected, (Figure 27), current data is added to
the Main Panel display.
3. Click the Plot every Nth fit radio button to automatically set the rate at which the
data is updated on the Main Panel display.
a. For example, if you set the value to 5, a data point will be saved every 5
seconds.
4. Click Save.
The analyzer restarts sampling at whatever rate was set last.
41
Advertisement
Table of Contents
