Table of Contents
Advertisement
Inlet/Outlet Connections
The inlet and outlet ports are located on the left side panel of the analyzer. (Figure 8)
Gas to be measured is connected to the ¼" push-connect INLET port.
•
An External In-Line Filter (Figure 10) is provided and can be attached to the INLET
•
port.
During normal operation, the pump draws the sample through the analyzer inlet, and
exhausts the sample through the waste port.
The ¼" push-connect WASTE port may be:
Routed to the facility ventilation system, or
•
Remain open, expelling non-hazardous gas into the room air.
•
ABB GLA132 Series Ultraportable User Manual
Figure 8: Inlet/Outlet ports
19
Advertisement
Table of Contents
