Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Appendix C:
Access Using VNC Software
Listed below are three types of devices that can be connected to the analyzer through the
wireless router to access information:
Android OS based devices (smart phones and tablets)
•
iOS based devices (smart phones, tablets, and laptops)
•
Windows based devices (smart phones, tablets, and laptops)
•
Each of these devices uses Virtual Network Client (VNC) software to connect the analyzer
through the router. Follow the instructions below to install and set up VNC software on the
device you are connecting to the analyzer.
Set up VNC Software on Android Devices
1.
On the Android device, go to Settings > WiFi > Connect to Wireless Network.
2. Connect to the wireless SSID network printed on the front of the router. Enter the
TP-Link wireless router (example: TP-LINK-775C).
a. For ultraportable analyzers, the TP-Link wireless router is installed inside
the analyzer and may be accessed by opening the case.
b. For all other analyzers, the optional TP-Link wireless router is attached to
the outside of the case.
3. Select SSID.
4. Enter the wireless password printed on the front of the router. Every router has a
different, unique SSID number, and wireless password.
5. Select Connect. (Figure 76)
Set Up Devices for Remote
Figure 76: Password Connection Screen
76
Advertisement
Table of Contents
