Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Data Interface Connection Ports
This section describes the data interface connections as shown in Figure 5. These
connections may vary depending on analyzer types.
Ethernet port – Connects the analyzer to a local area network (LAN) and allows
•
access to the data directory using an external computer.
USB ports – Used for transferring data to a USB memory device, or to connect a
•
USB keyboard and mouse.
Serial port (9 pin D-sub) – For real-time digital measurement output.
•
DCS port (BNC male port) – Used to control the External Dynamic Dilution System
•
(EDDS)
Video port (15 pin D-sub) – Connects an external monitor to the analyzer.
•
MIU (25-pin data port) – For connecting the optional Multiport Inlet Unit (MIU).
•
Figure 5: Data Interface Connection Ports
16
Advertisement
Table of Contents
