USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Display – Toggles through the three Main Panel display formats:
Numeric Display – Default display. Displays the numeric readout of the last
•
measurement. (Figure 23)
Alarm Status Display – shows the operational status of the analyzer. (Figure 24)
•
Spectrum Display – Displays the raw and fitted spectral scans. (Figure 25)
•
Time Chart Display – Displays the concentration over time. (Figure 27)
•
Rate – Adjusts the rate at which data is written to the log file. (Figure 28)
Parameter Window – Displays the:
Time – Current time
•
Data File – Current filename to log data
•
Gas Temperature – Temperature in Cell (Celsius - °C)
•
Gas Pressure – Pressure in Cell (Torr)
•
Laser A τ – Laser A ring-down time (micro-seconds - µs)
•
MIU– Multiport Inlet Unit
•
Rate – Sampling Frequency
•
Disk Space – Remaining hard-drive space
•
Files – Allows easy transfer of files onto USB storage devices.
Setup – Accesses additional configuration and service menus.
Exit – Exits the application and shuts down the analyzer.
32