USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Appendix F:
(Optional)
The analyzer can be factory equipped to include a batch injection system. The batch
system allows the user to manually introduce individual samples to the analyzer, using
syringe injection.
Figure 111 shows the plumbing configuration for the optional batch mode.
Plumbing configurations may vary depending on analyzer type.
Accessories Required for Batch Injection
The necessary hardware and supplies for batch mode operation include:
An external pump (ACC DP3H)
•
Pump slave power cord
o
Pump connection kit
o
Additional ports on the front and back panels of the analyzer. (Figure 112)
•
Syringe injection port (front panel)
o
Zero-air inlet 1/4" Swagelok port (back panel)
o
A 140mL Syringe with needle
•
A 22-gauge centering needle
•
Batch Mode Operation
Figure 111: Batch Injection Plumbing Diagram
99