USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
2. Select Batch Injection mode in the analyzer software:
a. Click the RATE button (clock icon) in the User Interface Control Bar . (Figure
115)
3. The Operating Mode pop-up menu displays. (Figure 116)
a. Select either:
Syringe Injection
•
Syringe Injection (Dilution x10), if applicable
•
4. Click Save.
Figure 115: Click the Rate Button
The sample will be diluted x10 by filling the cavity with zero air
o
before measurement.
Figure 116: Rate Selection Menu
102