Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
Set up VNC Software on iOS Devices
1.
On the iOS device, go to Settings > WiFi, then select the network from the list.
2. Connect to the wireless SSID network. Enter the TP-Link wireless router. (example:
TP-LINK-775C)
For ultraportable analyzers, the TP-Link wireless router is installed
•
inside the analyzer and may be accessed by opening the case.
For all other analyzers, the optional TP-Link wireless router is attached
•
to the outside of the case.
3. Select your SSID network. For example, TP-LINK-D036. (Figure 82)
4. The Enter Password screen appears. (Figure 83) In the Password field, enter the
wireless password printed on the front of the router.
5. Select Join.
6. The Network Connections screen confirms that the iOS device is connected to the
router. (Figure 84)
Figure 84: Router Connection Confirmation Screen
Figure 82: Network Connections Screen
Figure 83: Router Connection Screen
80
Advertisement
Table of Contents
