Table of Contents
Advertisement
USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
The MIU outlet port is:
Open when the MIU is powered on
•
Open at initialization
•
Open and closes as specified on the MIU tab when the analyzer software has
•
properly initialized
While the MIU is operating, the current valve being sampled/referenced and its text
description is shown in the parameter window of the User Interface Control Bar. (Figure
104)
The description is:
Displayed on the parameter window of the User Interface Control Bar during
•
analysis. (Figure 104)
Saved to a data file
•
Figure 104: User Interface Control Bar (showing MIU information)
9. When sampling is complete, disable the MIU by returning to the MIU screen , and
uncheck the MIU Enable check box. (Figure 103)
93
Advertisement
Table of Contents
