Relearning A Patient's Respiration Pattern - Dräger Infinity Series User Manual

Relearning a Patient's Respiration Pattern

When respiration monitoring is enabled and set to
itor takes about one minute to automatically learn the patient's
respiration pattern. You can initiate a new learning phase at any
time. When respiration monitoring is enabled and set to
you must initiate the learning of the respiration pattern manually.
Whenever you change or reposition electrodes or if you notice
significant changes in the patient's breathing pattern, repeat the
learning process.
STEPS: Relearning a Patient's Respiration Pattern
1. Click on the
2. Click on
During the learning phase, the monitor displays the message Rsp
Relearning at the bottom of the screen and the
Rsp parameter box. During the learning phase, the patient should
rest as quietly as possible and breathe normally.
VF4
Respiration Monitoring
parameter box.
Rsp
.
Relearn
Infinity Gamma Series
, the mon-
Auto
,
Manual
label in the
LRN
Page 11-13