Respiration Monitoring Display - Dräger Infinity Series User Manual

Respiration Monitoring Display

You can display the respiration waveform in one of the bottom
display channels.
NOTES:
!
!
!
The respiration rate appears in the
Rsp waveform. When you start monitoring, the rate value does
not appear until the detection of six valid breaths.
VF4
The monitor has a total of three or, as an option, four waveform
display channels. For more information, contact your Dräger
representative.
When using a 3-Lead ECG cable, you must display ECG lead
II. If Lead I or III is displayed instead, the monitor does not
calculate a respiration rate and requests that you select Lead II.
The respiration waveform moves at 25% (~ 6.25mm/sec) of the
rate of other waveforms on the screen.
Infinity Gamma Series
Respiration Monitoring
parameter box next to the
Rsp
Page 11-5