Rrc Apnea Time - Dräger Infinity Series User Manual

RRc Apnea Time

The monitor can detect apnea in all monitoring modes based on
changes in exhaled CO
10 to 30 seconds in increments of 5 or OFF
!
NOTE: In neonatal monitoring mode, the Apnea alarm is on by
default.
Upon detection of an apnea event and after the selected apnea
time has elapsed, the monitor triggers a serious alarm.
STEPS: Setting the RRc Apnea Time
1. Click on the
2. Click on
3. Click on
4. Select the desired apnea time and click the knob.
NOTE: Changing the value for the RRc Apnea time also changes
the Apnea Time setting for Rsp monitoring.
VF4
values. Apnea times are:
2
parameter box.
etCO
2
More...
.
RRc Apnea
Infinity Gamma Series
End-Tidal CO2
Page 13-13