Table of Contents
Advertisement
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
2.
Then select this button. For M300 patients this will also mark
an event.
3.
Press Stop button on Recorder to stop any recording while in
process.
4.
Select the Record button symbol from the patient's Main
screen viewport to stop recording.
TO CONFIGURE INDIVIDUAL PATIENT ALARM LIMIT SETTINGS
1.
Open the BedView page by selecting the viewport of the pa-
tient on the ICS Main screen.
2.
Select the Alarms... button in the menu bar of the patient's
BedView page.
3.
Select the Limits tab.
4.
Select the corresponding button in the Alarm on/off column to
activate or deactivate alarm monitoring. When an alarm is
turned off the following symbol appears:
5.
Select the corresponding button in the Lower & Upper col-
umns to adjust the lower & upper alarm limits.
6.
Select one of the following settings in the Archive column to
determine response to an alarm:
Off: no event is stored and no recording is generated.
o
Store: stores the event in the disclosure database.
o
Record: generates a strip recording. Store/Rec: stores the
o
event in the disclosure database and generates a strip re-
cording.
7.
Repeat steps 4 through 6 for each parameter to be configured.
8.
Select the Apply button.
TO CONFIGURE INDIVIDUAL PATIENT ARRHYTHMIA ALARM
SETTINGS
1.
Open the BedView page by selecting the viewport of the pa-
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
OR
© 2014 Draeger Medical, Inc.
| 22
Advertisement
Table of Contents
