3.4 Assembly Group Side Guards
3.4.3 Armrest on the side guard
(1) To set the arm rests remove the screws (A)
on both sides, place the cushion in the holes
to the wanted position, replace the screws and
retighten them.
3.4.4 Desk side guard or long side guard
(2) Depending on the load, the shutter of the
folding side parts (Desk or Long) must be ad-
justed occasionally. This is done via the screws
(A).
3.4.5 Arm rest/ clothes guards at desk- or long side guard
The clothes guards and / or armrests (3-6) are mounted on the desk and long side guards as previously
described.
(3)
2022-12-19
(4)
Service Record Vector & Vector BSA
(1)
(A)
(2)
(A)
(5)
(6)
23 of 40
Need help?
Do you have a question about the Vector and is the answer not in the manual?