SORG Vector Service Record page 38

5 Technical specifications
Vector BSA
Model: Vector BSA
Type: 791
German Aid Indix Nr.: 18.50.03.1076
All measurements ± 5%
Indication
seat width (SW)
seat depth (SD)
back height (BH)
upper edge seat to upper
edge footrest
back angle
lower leg length
arm rest height
Seat angle
frame 1
frame 2
frame 3
frame XL
ETRTO wheel size 22"
ETRTO wheel size 24"
ETRTO wheel size 26"
diameter handrim
diameter handrim
diameter handrim
diameter handrim
camber
Seat height in front
Seat height in front
Seat height behind
Seat height behind
wide wheelchair
Wheelchair length abso-
lut
Wheelchair height abso-
lut
incline
descent
stability
turning circle
load capacity (max.)/
weight testdummy
Curb weightworthy 16.2
kg at:
heaviest piece:
wheels
lenght of use of the wheelchair 3 years
life cycle of the wheelchair 5 years
Normative requirements
38 of 40
Measurements
BSA-frame 300-460 mm
BSA-XL-frame 300-460 mm
BSA-frame 340-500 mm
BSA-XL-frame 440-500 mm
BSA-frame 300-500 mm
BSA-XL-frame 300-500 mm
with foot plate 300-325 mm
mounting inside 85-360 mm
with XL frame 300-490 mm
with foot plate 355-520 mm
mounting outside
with XL frame
80 -120 °
45 - 520 mm
170 - 300 mm
0 - 10°
484 mm
504 mm
559 mm
559 mm
Ø 25-451
Ø 25-489
Ø 28-590
bei 22" (559mm) Ø 481 mm
bei 24" (610mm) Ø 533 mm
bei 26" (660mm) Ø 585 mm
Ø 19 mm
0°, 2°, 5°, 8°, 11°
min. 395 mm
max. 555 mm
min. 340 mm
max. 560 mm
min. SB + 200 mm
absolutely SB + 405 mm
min. min. 835 mm
max. max. 1065 mm
with push handles min. 750 mm
Standard XL max. 1120 mm
with push handles max. 1055 mm
height adjustable XL max. 1220 mm
12,3% = 7°
12,3% = 7°
12,3% = 7°
ca. 1000 mm
120 kg
frame SW/SD 46/50, rear wheel 24", caster 6" PU, leg support continious, seat
and back cover, side guard
rear wheel 1,2 – 2,2 kg
leg support 2 kg
frame 8 kg
commercial pneumatic tires, sizes 1 ", 1 3/8" or puncture-proof tires (same dimen-
sions), tire inflation pressure usually 3-10 bar
The wheelchair meets the requirements of ISO 7176-8 and the requirements
against ignition.
Service Record Vector & Vector BSA
Comment
growing out of each seat width 40
mm
growing out of each seat depth 40
mm
growing out of each back height 50
mm
The lower leg length results from
the distance from: OK Seat to OK
Footplate plus Thickness of the seat
cushion
depending on the version
depending on the version
depending on the version
pure frame length
measured without push handles,
trough back, wheels or foot plate
Commercially available pneumatic
tires in the sizes 1 "(25.4mm), 1
3/8" (35mm) - sizes 355 mm (20
"), 451 mm (22"), 540 mm, (24
") All puncture-proof tires in the
mentioned dimensions.
pipe diameter
with drum brake wheels: 2°, 5°, 8°
The seat heights are measured from
top edge seat to floor, without seat
pad.
For the smallest or largest camber
with outdoor front end longer
depending on the wheelchair size
Depending on size and design
at not excessive demand
2022-12-19