SORG Dynamis TSD Service Record
  1. Manuals
  2. Brands
  3. SORG Manuals
  4. Wheelchair
  5. Dynamis TSD
  6. Service record

SORG Dynamis TSD Service Record

Hide thumbs Also See for Dynamis TSD:
Table of Contents

Advertisement

Quick Links

Download this manual
Service record Dynamis TSD
Dynamis TSD
Dynamis TSD
All individual adjustments to the wheelchair are described below.
Tools and specialist knowledge are required for these settings. Please
leave these adjustments to a qualified rehabilitation specialist.
2021-05-26
Service record
Service record
Service record Dynamis TSD
Unique people, unique solutions
Besondere Menschen, besondere Lösungen.
EN
1 of 36

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dynamis TSD and is the answer not in the manual?

Questions and answers

Related Manuals for SORG Dynamis TSD

Summary of Contents for SORG Dynamis TSD

  • Page 1 Service record Dynamis TSD Dynamis TSD Dynamis TSD Service record Service record All individual adjustments to the wheelchair are described below. Tools and specialist knowledge are required for these settings. Please leave these adjustments to a qualified rehabilitation specialist. 2021-05-26...
  • Page 2 All content, especially texts, photographs and graphics, are protected by copyright. All rights, including reproduction, publication, editing and translation, are reserved. © by SORG Rollstuhltechnik GmbH+Co. KG Benzstraße 3-5, 68794 Oberhausen-Rhein hausen / Germany. You can find our general terms and condi- tions on our order forms and at www.sorgroll-...

  • Page 3: Table Of Contents

    3.10.1 Depth adjustment 3.10.2 Height adjustment 3.11 Assembly group lateral support 3.11.1 Nomenclature 3.11.2 Vertical adjustment 3.11.3 Horizontal adjustment 3.11.4 Fine adjustment of the pad holder 30 3.11.5 Adaption to the user 2021-05-26 Service record Dynamis TSD 3 of 36...

  • Page 4: Wheelchair Overview

    17 Control lever for drum brake 18 Star handle for height adjustment, push handle 19 Armrests 20 back guide 21 Wheel 22 Shock absorbers 23 brake lever of the knee lever brake 24 caster wheel 4 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 5: General Information

    Flat-blade screwdriver • Plastic hammer • Side cutter • Thread locking liquid • Bicycle tube repair kit • Workbench / vice with plastic jaws • Special open-end wrench for adjusting the shock absorber 2021-05-26 Service record Dynamis TSD 5 of 36...

  • Page 6: Explanation Of Symbols

    Rotate counter clockwise Reat view Steps to be performed at the same time Attach a part Steps to be performed in se- quence Remove a part Steps to be performed on both sides 6 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 7: General Safety Instructions

    Approach obstacles only slowly and over- come them carefully so that little force is exerted on the steering wheel, drive wheel and the wheelchair as a whole. 2021-05-26 Service record Dynamis TSD 7 of 36...

  • Page 8: Assembly Groups

    48 cm 50 cm 53 cm Standard position After all position changes, check the tilt Inner hole for stability with the patient when fully tilted and tilt protection modify the position if necessary! 8 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 9: Adjusting The Height And Position Of The Wheel Cover When The Wheel Changes Position

    Move the side guard (B) into the alternative holes (C) according to the desired position of the wheel and screw it on a little so that the height of the side guard can still be mo- ved. • Then proceed according to the vertical adjustment. 2021-05-26 Service record Dynamis TSD 9 of 36...

  • Page 10: Moving The Wheels Without Camber Adapter(20",22",24")

    "in opposite directions". At 0 °: inside = thick end below / outside = thick end above. Correct the position of the knee lever brake and then check that it is working pro- perly. 10 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 11: Caster Wheels

    / - wheel combination • and tighten the screws (A) again. Note: Depending on the size of the new caster wheel, the caster fork may also have to be replaced. 2021-05-26 Service record Dynamis TSD 11 of 36...

  • Page 12: Assembly Group Frame

    • Proceed in the same way with all screw connections on the opposite side. • then tighten the screws again. The traverses must be offset at the same distance on both sides. 12 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 13: Assembly Group Seat

    If you do not move the seat unit with the gas pressure spring in parallel, the result is a wrong tilting path and possibly a diffe- rent seat inclination, which endangers the tilt stability of the Dynamis TSD. (see table on page 8) 2021-05-26 Service record Dynamis TSD...

  • Page 14: Conversion To Double Gas Pressure Spring

    (6) Attach the second lower mount (A) of the gas pressure spring to the two cross members (B) and • screw the mount with the screws (C) tightly into the prepared holes in the crossbars (3D). 14 of 36 Service record Dynamis TSD 2021-05-26...
  • Page 15 Otherwise there will be an incorrect tilting path. Step 10: AScrew the release lever back on • Mount the new release lever for the gas pressure springs on the push bar again. 2021-05-26 Service record Dynamis TSD 15 of 36...
  • Page 16 • Set the push bow to its maximum push height, • (10) fold the back of the Dynamis TSD forward around and • lalso place the push bow forward to- wards the legrest (see illustration) so that you get the maximum length for the bowden cable.

  • Page 17: Assembly Group Back

    Please note the following steps: 1. Increase the counterforce (2): Turn the adjusting nut to the right with the help of the SORG open-end wrench. This increases the dynamism of the back. 2. Reduce the counterforce (3): Turn the adjusting nut to the left with the help of the SORG open-ended spanner.

  • Page 18: Assembly Group Leg Support

    The depth of the legrest can be continuously adjusted up to 8 cm. To do this, please follow the steps below: 1. Loosen the clamping screws (A) on the seat frame, then 2. Adjust the depth as desired. 3. Tighten the screws again and check. 18 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 19: Adjusting The Height

    1. Loosen the screws. (1A) 2. Now move the calf clamping plate and at- tach the removed elements in reverse order. 3. Make sure that all screws are properly tigh- tened. 2021-05-26 Service record Dynamis TSD 19 of 36...

  • Page 20: Height Adjustment Of The Footrest

    3. Screw in the screws (4A) and the stop parts (4B) up to the outer tube. 4. Now pull the stirrup down a little 5. and screw in the stop part (4B) completely. 20 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 21: Assembly Group Ergo-Seat

    3.6.2 Removing the ERGO seat To remove the ERGO seat, the screw connection of the back guide must be removed (1A). In the next step, the screw connection on the seat frame must be removed (2A). 2021-05-26 Service record Dynamis TSD 21 of 36...

  • Page 22: Axis Of Rotation Seat Part/Back Part

    • Remove the screws of the seat center section / side section and screw them back into the center hole. (C) • Check all screws to ensure that they are firmly tightened. 22 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 23: Increase Seat Width Ergo Seat And Back Unit

    Now the previously removed screws are screwed back in to reconnect the seat side cover with the seat center part. Please repeat the same step with the other side cover. 2021-05-26 Service record Dynamis TSD 23 of 36...

  • Page 24: Assembly Group Brakes

    (B) again. Possible impairment of the braking force can result from incorrectly adjusted pulling force of the bowden cable, defective bowden cable, or dirty brake bodies / brake shoes. 24 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 25: Knee Lever Brake

    (attention max. distance!), • tighten both screws again and • control the braking force of the brake. Readjust the brakes after making any changes to the wheels. 2021-05-26 Service record Dynamis TSD 25 of 36...

  • Page 26: Assembly Group Frame Accessories

    Guide the step tube (A) into the right or left frame tube, • insert the self-locking nuts (B) as well as the saddle and lock washer into the holes • and tighten the nuts (B) firmly. 26 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 27: Assembly Group Headrest

    The inclination of the headrest can be brought into the desired orientation by loosening the three screws (A) on the spherical head and then adjusting the head molding. Then the screws must be tightened again. 2021-05-26 Service record Dynamis TSD 27 of 36...

  • Page 28: Assembly Group Abduction Wedge

    3. Set the desired height and 4. put everything back together in reverse order. The protruding adjustment part (2 A) must now be sawed off. 28 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 29: Assembly Group Lateral Support

    Horizontal extension (6) An additional horizontal extension can be achieved by inserting an extension piece (spare part). Remove screw (6C) insert extension piece and screw tight again at both ends. 2021-05-26 Service record Dynamis TSD 29 of 36...

  • Page 30: Fine Adjustment Of The Pad Holder

    (6A) firmly. You fix the ball joint by tightening the four screws (B). 30 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 31: Repairs / Maintenance / Re-Use

    Set the seat tilt (if available) to 90 ° • removable textile parts, if necessary in foil or similar pack • Secure the wheelchair against rolling away and soiling • Storage in a dry environment without aggressive environmental influences 2021-05-26 Service record Dynamis TSD 31 of 36...

  • Page 32: Lifespan

    For safety reasons and to maintain product liability, an inspection by your specialist retailer is re- quired at least once a year. This must be carried out and documented according to the checklist on the following page. 32 of 36 Service record Dynamis TSD 2021-05-26...
  • Page 33 Locking mechanisms (tripod springs of the push handles, quick-release axles, eccentric clamps, etc.) checked for functionality, Anti tipper checked for tight fit and functionality. Oil: Moving parts and bearings are oiled Final check: Functional check of all mechanical adjustment devices carried out 2021-05-26 Service record Dynamis TSD 33 of 36...

  • Page 34: Technical Data

    Frame size 1, seat frame, 12 '' wheels with Empty weight driving with RB drum brakes, caster wheels, legrests, push bars 300 mm, 12 '' rear wheels, 4 '' PU castor wheels 34 of 36 Service record Dynamis TSD 2021-05-26...

  • Page 35: Meaning Of Labels

    5.3 Declaration of conformity SORG Rollstuhltechnik declares that the Dynamis TSD product is a class 1 device and that it com- plies with the relevant provisions of EU Guideline (EU) 2017/745on medical products. This was confirmed by a conformity assessment procedure according to the me- dical product guidelines proven.
  • Page 36 Service record Dynamis TSD SORG Rollstuhltechnik GmbH + Co. KG Benzstraße 3-5 68794 Oberhausen-Rheinhausen Germany Fon +49 7254 9279-0 Fax +49 7254 9279-10 info@sorgrollstuhltechnik.de www.sorgrollstuhltechnik.de Stamp retailer...

Table of Contents