Assembly Group Tipping Lever; Mounting - SORG Vector Service Record

3.7 Assembly Group tipping lever

3.7.1 Mounting

(1) In order to add an anti-tipper:
• Remove the cap at the bottom of the
frame rod,
• guide the anti tipping lever (A) from
underneath in the frame rod and
• screw it on tightly to the frame with the
screw (B).
It is not possible to mount both an anti-tipper
and a tipping lever on the same frame side!
2022-12-19
(1)
Service Record Vector & Vector BSA
(A)
(B)
27 of 40