SORG Vector Service Record page 36

4 Repairs/maintenance/reinstatement
Checklist maintenance and care (user)
A poor or neglected maintenance of the wheelchair represents a significant safety risk.
Before each use:
Please check:
• frame, back tubes, mounting parts and accessories for visible damages, deflections, cracks
or missing/loose screws,
• wheels/quick release axles for firm fit,
• the airpressure of the tires, tire tread,
• the function of the brakes,
• firm fit of the angle adjustements/eccentric clamps,
• firm fit of seat plate/back/foot plate,
• the function of the anti-tipper/seat and back straps,
• if all previously dismantled parts are put on again or firmly locked.
Every 3 months:
(depending on use, earlier)
Please check:
• screws for firm fitting
• welds, attachments and accessories for hidden damages, deflections or cracks
• tire tread
• the firm fit of third-party systems (if available)
Clean the wheelchair and oil all moving parts.
If you notice any defects during maintenance, please contact your specialist retailer im-
mediately and do not use the wheelchair anymore.
Checklist yearly inspection (specialized retailer)
Template (available for download at www.sorgrollstuhltechnik.de/downloadportal)
Preparatory Work
cleaning done
Check:
Frame, back, mounted parts and accessories checked for damage, bends, cracks and corrosi-
on,
all fixing screws checked for firm fit and completeness,
casters and rear wheels as well as the associated attachments checked for good condition,
functionality and proper running qualities,
spokes checked for firm fit and completeness,
brakes cleaned and maintained,
Locking mechanisms (tripod springs of push handles, quick-release axles, eccentric clamps,
etc.) checked for functionality,
anti-tipper checked for firm fit and fuctionality.
Oiling:
moving parts and bearings oiled
Final check:
functional check of all mechanical adjusting devices carried out.
36 of 40 Service Record Vector & Vector BSA 2022-12-19