Table of Contents
Advertisement
8.1 Tractor Pre-Operation Inspection/Service
Refer to the tractor operator's manual to ensure
a
complete
pre-operation
scheduled service is performed according to the
manufacturers recommendations. The following
are some of the items that require daily service
and inspection:
•
Tire condition/air pressure
•
Wheel lug bolts
•
Steering linkage
•
PTO shield
•
SMV sign is clean and visible
•
Tractor's lights are clean and functional
•
Tractor Seat belt is in good condition
•
ROPS is in the raised position
•
No tractor oil leaks
•
Radiator free of debris
•
Engine oil level and condition
•
Engine coolant level and condition
•
Power brake fluid level
•
Power steering fluid level
•
Fuel condition and level
•
Sufficient lubrication at all lube points
•
Air filter condition OPS-U-0030 str
8.2 Rock Picker Pre-Operation Inspection/Service
Before each implement use, a complete inspection and service is required to ensure the implement is in a
good and safe working condition. Damaged and/or broken parts should be repaired and/or replaced
immediately. To ensure the implement is ready for operation, conduct the following
The operator's manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
•
Ensure the manual canister is secured to the
equipment with the operator's manual inside.
•
Ensure all safety signs are in place and legi-
ble. Replace missing, damaged, and illegible
decals. OPS-U- 0011 str
Gladiator RWP-1935 01/23
© 2023 Alamo Group Inc.
OPERATION
inspection
and
Operation Section 4-17
Advertisement
Table of Contents
