Table of Contents
Advertisement
FOLDING ROCK PICKER PRE-OPERATION INSPECTION
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped
and the tractor is in park with the parking brake engaged. Make sure the mower is resting on
the ground or securely blocked up and all hydraulic pressure has been relieved.
The Operator's Manual is in the canister on the machine
All safety decals are in place and legible
The tongue/hitch connection bolts and pins are tight
There are no cracks in tongue, hitch, or implement
The tow chain is secured to the tractor and implement
The hydraulic cylinders pins are properly retained
There are no leaking or damaged hoses
Reel/Drums are in good condition and turn freely
Reel/Drum Coupler/Chains are adjusted properly
Reel/Drum Coupler/Chains are in good condition
Drum Chains are properly lubricated
Check for damaged or missing Reel/Grate/Drum teeth
PTO Pump is securely attached to tractor
PTO Pump Chain is securely attached to the tractor
Hydraulic Cooler/Reservoir has the proper amount of oil
Hydraulic Cooler is free of damage and debris
Tires are properly inflated and in good condition
Wheel lug nuts are tight
Transport locks are in good condition and operational
Proper hourly greasing done as per Operator's Manual
_______________________________
Make:
Operator's Signature:
DO NOT OPERATE an UNSAFE TRACTOR or IMPLEMENT
Gladiator RWP-1935 01/23
© 2023 Alamo Group Inc.
OPERATION
___________________
Machine ID#
________________________
Date:
_______________________
Make:
________________________
Shift:
Item
____________________________________________
Operation Section 4-22
IMPORTANT: Scan
this QR Code for
an electronic copy
of this inspection
sheet.
Condition
at Start of Shift
__________________________________
Shift:
Specific Comments
if not OK
Advertisement
Table of Contents
