Schulte GLADIATOR RWP-1935 Operator's Manual page 58

Variable width rock windrower/picker
Table of Contents

Advertisement

Ensure the rock picker is securely attached to
the tractor drawbar with a proper size pin and
lynch pin.
Ensure that a properly rated safety tow chain is
equipped securing the rock picker to the trac-
tor.Ops-671
Ensure all shields and rock deflectors are in
position and not damaged. Replace worn,
broken and missing sections immediately.
Inspect that all bolts and screws are in position
and properly torqued.
Ensure the wing drums are in good condition
and rotate freely. Ops-3084
Inspect the windrower teeth and make sure
they are hard surfaced and that the bare tooth
is not exposed. If the hard surfacing is not
properly maintained, highly accelerated tooth
wear will result.
Inspect the condition of the wing drive chains.
Ops-3085
Ensure the chain tensioner are properly set.
Ensure chain case shields are secure and in
good condition.
Gladiator RWP-1935 01/23
© 2023 Alamo Group Inc.
OPERATION
Operation Section 4-18

Advertisement

Table of Contents
loading

Table of Contents