Table of Contents
Advertisement
BEFORE leaving the tractor seat lower the implement, set the parking
brake and/or set the tractor transmission in parking gear, disengage the
PTO, stop the engine, remove the key, and wait for all moving parts to
stop. Place the tractor shift lever into a low range or parking gear to
prevent the tractor from rolling. Never dismount a Tractor that is moving or
while the engine is running. Operate the Tractor controls from the tractor
seat only.
3. Exit the tractor and set the drum discharge
height by installing Depth Stop Spacers on the
Depth Adjust Rods.
•
NOTE: Both sides must have equal Spacers
installed to avoid permanent machine dam-
age by twisting the frame.
•
To raise the drums add more Depth Stop
Spacers.
•
To lower the drums, remove spacers.
•
Unused Depth Stop Spacers can be stored
near the front pivot of the Float Frame.
4. Set the height of the outer wing by adjusting the Gauge Wheel Ratchet Jack.
•
Raise the drum by lowering the wheel.
•
Lower the drum by raising the wheel.
NOTE: When adjusting the gauge wheel level be sure to store the ratchet jack handle in a position where it
won't interfere with the machine function.
Gladiator RWP-1935 01/23
© 2023 Alamo Group Inc.
OPERATION
(SG-9)str
Operation Section 4-14
Advertisement
Table of Contents
